Brief
Mobile Crane Truck
SummaryA display model of a yellow mobile crane truck, about 26 studs long and 8 studs wide, on a 32x32 baseplate. The chassis is framed with yellow Technic bricks with their round holes facing out on both sides, including a low frame rail at wheel height, and it rides on three car-axle wheel sets that show fully through open wheel arches. The front cab has a dark windscreen, side windows, two small mirrors and an orange roof beacon. On the back sits a slewing superstructure with an operator cab, a dark grey counterweight and a long stepped yellow boom with a black hook block. Four outriggers reach down to pads on a grey road, beside a small stack of steel beams waiting to be lifted.
BaseBaseplatePaletteYellowBlackDark Bluish GrayLight Bluish GrayLight BlueWhiteRedOrange
Features- Long yellow lorry chassis framed with 1x6 and 1x8 Technic bricks showing rows of round holes along both sides
- Three car-axle wheel sets (one under the front cab, two in tandem at the rear) showing fully through open wheel arches, with a yellow Technic frame rail at wheel height on each side, holes facing outward
- Front truck cab with a dark windscreen across the front, light-blue side windows, two small black mirrors, an orange roof beacon, a black grille and headlights, with no lettering or logos
- Crane superstructure with a small offset operator cab and a dark bluish-gray stepped counterweight block
- Long yellow boom built from Technic bricks, raised at an angle in staircase steps, with a black hook block hanging below the tip
- Four outrigger beams extended sideways, each with a vertical leg down to a black pad on the road
- Gray road strip with lane markings, plus a small stack of dark gray steel I-beams next to the truck
Questions- Should the boom point forward over the cab, or swing out to the side over the beam stack?
- Should the road run along the full length of the baseplate, with the truck and beams both on it, or should the beams sit on a separate site area beside the road?
- Do you want black-and-yellow hazard stripes on the outriggers and counterweight, or plain colours only?